Yes, the MRU outputs accelerations as well as velocities. You can configure the MRU to output acceleration and velocity data in the MRU, Vessel or NED frame. Both raw and lowpass filtered accelerations are available.
On deck, 50 m depth
Lemo or Subconn
5 cm or 5.0%
Dry areas
RJ45 or RJ50
5 cm or 5.0%
6000m depth
Subconn
5 cm or 5.0%
Hazardous areas
Pigtail cable
5 cm or 5.0%
When navigating the complexities of motion sensing and navigation systems, it is essential to understand the distinctions between devices and systems like Inertial Measurement Units (IMUs), Inclinometers, Roll & Pitch sensors, Vertical Reference Units (VRU), Attitude and Heading Reference Systems (AHRS), Motion Reference Units (MRUs), Gyrocompasses, and GNSS-Aided Inertial Navigation Systems (GNSS/INS). Each serves specific purposes and offers different levels of functionality, accuracy, and application scope.
Gyrocompass
The MRU Compact uses a standard RJ45 ethernet cable where power is supplied through Passive PoE (Power over Ethernet). In most cases you cannot connect the MRU directly to a an ethernet switch with PoE, since most of these are Active PoE.
We normally supply your first MRU Compact with a start kit containing a POE RJ45 spliter socket. You will only need standard RJ45 cat5 ethernet cables to connect the MRU to the spliter socket and the spliter socket to your PC or ethernet switch.
When navigating the complexities of motion sensing and navigation systems, it is essential to understand the distinctions between devices and systems like Inertial Measurement Units (IMUs), Inclinometers, Roll & Pitch sensors, Vertical Reference Units (VRU), Attitude and Heading Reference Systems (AHRS), Motion Reference Units (MRUs), Gyrocompasses, and GNSS-Aided Inertial Navigation Systems (GNSS/INS). Each serves specific purposes and offers different levels of functionality, accuracy, and application scope.
Inclinometer
